Question: Can I Put A 12 Speed Cassette On A 9 Speed Hub?

Will 11 speed cassette work with 10 speed?

It will shift fine with a Shimano or SRAM 11-speed system.

And in case any of you were wondering, if you have a 10-speed Shimano or SRAM system and buy a wheelset now, you can still run 10-speed cogs on that wheel.

To put a 10-speed cogset on an 11-speed freehub, you just put a spacer behind the largest cog..

Are 9 and 10 speed cassettes the same width?

Sometimes, the difference lies in the brand For the Shimano brand, their 9-speed cassettes have an extra cog added to the 8-speed cassette, while the overall width remains the same. … The same thing goes for the 10-speed where it still has the same width as an 8-speed cassette. This makes the 10-speed slightly narrower.

Can I put a 12 speed cassette on a 10 speed hub?

Yes, you can. All mountain bike cassettes are made to fit standard HG freehub. 8, 9, 10, 11 and 12-speed cassettes for Shimano splined freehubs. Unless you have some older cassette that is using a road bike standard which requires bigger freehub for 11-speed adaptation.

Can you fit a 10 speed cassette on a 9 speed hub?

The most you should need to do to allow a 10 speed cassette to work on most 9 speed hubs is install a spacer behind the cassette to make sure the cassette seats tightly. … You can put a new 10 or 11 speed cassette on any of the older 9 speed hubs.

Can you change a 10 speed hub to an 11 speed?

Luckily, many common and not-so-common wheelsets, as long as they’re at least 10-speed, can be upgraded to 11-speed by purchasing a new cassette body. The body is the part that attaches to the center of the hub and drives the wheel and bike when you pedal.

Is 8 speed bike enough?

8 speed rear cassette is good enough- Providing you get the range correct for your legs. But that is easier to do with 10 speed- I ride 8 speed(24) and 10speed (20) and have to admit that the 10 speed is easier to find the right cog. Even 7 speed is more than enough.

Are all 11 speed cassettes compatible?

When SRAM entered the road groupset market in 2006, it decided to adopt Shimano’s specifications for its chains and cassettes. As a result, the chains and cassettes from the two brands have always been completely interchangeable for any given type of transmission (e.g. 11-speed).

Can I put an 11 speed cassette on a 9 speed hub?

You only need a specific wheel / freehub body if it is a road cassette. An 11 speed Shimano MTB cassette will fit straight onto your MTB wheel which is running the 9 speed cassette. Obviously you’ll need a new 11 speed shifter, rear mech and chain too. … You will need new shifters and probably derailleurs.

What is the difference between 10 speed and 11 speed?

10 speed chains are slightly different from 11 speed. 10 speed chainrings are slightly different from 11 speed, but in most cases, you can simply swap out the chainrings instead of buying a whole new crankset. Some rear hub cassette bodies are only designed to accomodate up to a 10 speed cassette.

Can I use 11 speed derailleur with 10 speed shifter?

the 10 speed and 11 speed derailleurs are interchangeable as far as the shifters go, the difference is that a 10 speed derailleur doesn’t like a cassette cog much bigger than the 36t it was designed for, where the 11 speed derailleurs are designed for 40 and 42t cogs, and seem to be able to handle bigger.

Do I need a spacer for 11 speed cassette?

No MTB cassette requires a spacer, except on 11 speed road freehubs (as you now have). Road is a bit different – Shimano 10 speed road cassettes need them on 9/10 speed freehub bodies, and SRAM/Shimano 10 speed do on 11 speed freehub bodies.

Will a 12 speed cassette fit on a 11 speed hub?

12 speed cassettes are almost the same width as 11 speed, so range of movement shouldn’t be an issue. The gaps between cogs is the main difference.

Can I put a 9 speed cassette?

Yes, so long as the hub isn’t dura-ace. The Shimano 9- and 10-speed cassette standards aren’t exactly the same. 10-speed cassettes have deeper grooves, basically so that the dura-ace freehub can be made of aluminum and have higher splines that won’t get stripped.

Will Shimano go 12 speed?

Dura-Ace R9200 will be 12-speed Given that Shimano has already gone 12-speed with its XTR M9100 mountain bike groupset and both SRAM and Campagnolo have already added a twelfth cog to their road offerings, it seems all but certain that the next generation of Dura-Ace will follow suit.