Quick Answer: How Often Can I Use The 16 Hour Exception?

Does 8 hrs in the sleeper berth reset your 14?

Those 8 hours in the sleeper berth do not count as part of the 14 hours.

That means you have 7 hours of driving time still available, allowing you to drive from 10:00 p.m.

until 5:00 a.m.

At 5:00 a.m.

you take your second rest period, going off duty for 2 hours..

What happens if you unplug your eld?

Unplugging The ELD Device If the ELD is simple to plug in, it will be equally simple just to unplug the device. When unplugged, nothing is recorded and some Drivers are thinking this may buy them some extra drive time. Most don’t realize that reports are generated showing date, time, and location of the last recording.

Is 34 hour reset mandatory?

Is the 34-hour restart rule mandatory? No, the 34-hour restart provision is not mandatory. The rule is simply one tool you can use to manage your drivers’ hours. Depending on your drivers and their preferences, a 34-hour restart may be the quickest way to reset their clocks and get back on the road.

Where do truckers pee?

Most truck drivers pee at a truck stop or at rest areas. The driver will usually use the restroom at the truck stop while they are getting their fuel. If there is a rest stop with truck parking, a driver can stop there.

How often can you use the 16 hour rule?

You must be released from duty within 16 hours after coming on duty. You must only use this exception once every 7 consecutive days (unless you took 34 consecutive hours off to restart a 7/8-day period).

How often can I take a 34 hour restart?

every 168 hoursAccording to those provisions, the 34-hour period must contain two periods between 1 a.m. and 5 a.m. to be valid. The old rule also only allowed one 34-hour restart every 168 hours.

Can you split your 10 hour break?

The split sleeper berth rule allows a driver to extend an on-duty shift by splitting the required 10 consecutive hours of off-duty time into two shifts. … Under the FMCSA rules, the combination of the two rest periods is considered the equivalent of a 10-hour break.

How does the 8 and 2 split work?

With the 8/2 split, Seidl said a driver could drive for 6 hours and then take a 2-hour off-duty break and then drive for another 5 hours. At that point, an 8-hour off-duty period would commence and, when combined with the 2-hour off-duty break, provide the 10 hours of equivalent off-duty time as required by FMCSA.

How do I edit omnitracs logs?

Editing Your Driver LogSelect the hamburger menu button in the upper left corner of the Omnitracs One Mobile Dashboard. … Select HOS from the menu. … Select the kebab menu button in the upper right corner of the screen and select Log Editor from the menu. … To add an event, select the +Event button in the upper right corner of the screen.More items…•

Does personal conveyance count against hours?

Personal conveyance does not affect the driver’s on-duty time. It should go without saying, but personal conveyance is an off-duty drive status and therefore has no effect on the driver’s available hours of service, or on-duty time.

What is the 16 hour rule?

The 16-hour rule is a special exemption that allows certain drivers to remain on-duty for 16 hours instead of 14, but without extending the allowed 11 hours per day of driving. … Under the 16-hour rule, the driver can remain on-duty for an extra two hours but must be relieved from duty immediately after the 16th hour.

How do you do the 16 hour rule on OmniTracs?

Drivers must be released from duty within 16 hours after coming on duty following a 10-hour break….To select the 16 Hour Exception on your OmniTracs unit:Go to Hours of Service.Choose Exceptions from the Status Screen.Select 16 Hour.Tap OK.

What is the 70 hour 8 day rule?

70-hour in 8 days rule (or 60 in 7) – Total time spent Driving and On Duty cannot exceed 70 hours in any 8-day period. So add up the time spent Driving and On Duty today, plus the prior 7 days. That total cannot be over 70 hours.